How to Properly Install an Electric Heating Element: Step-by-Step Guide

Tools and equipment must all be at the site before attempting to install a new electric heating component. Ensure you have all needs when you begin the task.

So here are the things that you will require in order to complete the task: 

New electric heater-plus.

Screwdrivers

Pliers

Electrical tape

Wire nuts

Safety gloves

Safety goggles

Now that you have all the tools needed, the next steps are to set up the working area and ensure safety precautions are taken. When working with electricity, safety is crucial. Before doing anything, don't forget to cut some power.

To prepare the work area:

Remove any other items around the heat element so you have room to work.

You should lay down a mat or towel so that it does not cause damage to the floor.

Be certain that the room there is sufficient light so that you are able to see what you're doing.

Now let’s get the old heating element out. You need to follow these steps carefully to get rid of it:

Shut the power supply of the ceramic heating element at the circuit breaker.

Locate your old heating element, and using your screwdriver and pliers, remove any wires connected to the heating element.

Remove the old heating element.

Once the old heating element has been removed, it’s time to install the new one. To install the new heating element, follow these steps:

Insert your new heating element into the appliance and make sure it's in the correct position.

Using the screw ends of a wire nut, connect the wires from the appliance to the new ptc heating element and finishing the job by wrapping electrical tape around the tighter connections.

Recheck all connections to ensure they're tight and properly positioned.

Lastly, we will check to see if the heating element is functioning. Follow these steps:

OK at the circuit breaker turn the power supply back on.

Switch on the appliance, and adjust as per your required temperature.

Wait a few minutes for the heating element to heat up properly.

Pay attention to any unusual sounds or smells coming from the appliance.

If everything checks out and the appliance heats like it should, then pat yourself on the back! Congratulations, you now have a new high temperature ceramic heating element installed. In the case of any issues, make sure all connections are secure and seek help from a qualified professional.

Overall, the installation of an electric heating element can be simple with the correct tools, practiced caution, and a little patience. As always, when working with electricity, safety is paramount. If you prepare well and work carefully, you can replace a heating element in a short time. Happy heating, from Yidu.